How to Install Marble Pedestal Washbasin India Step by Step | Oceania
How to Install a Marble Pedestal Washbasin — Complete Step-by-Step Guide India
A marble pedestal washbasin from Oceania arrives fully finished, ready for installation. Installation requires a licensed plumber for water supply and drain connections. This guide helps you prepare your bathroom and understand the installation process before your Oceania marble sink arrives.
Before Installation — What You Need to Prepare
Floor assessment: Marble pedestal washbasins weigh 40-80 kg. Verify your floor can support this (all standard Indian concrete floors can)
Floor drain location: Your bathroom floor drain / waste pipe must be positioned within 30-40 cm of where the pedestal base will sit
Water supply: Hot and cold water supply lines should ideally exit from the wall or floor near the pedestal base
Space: Minimum 60 cm clearance on sides, 80 cm in front for comfortable use
Plumber: Book a licensed plumber in advance for connection day
Tools Required for Installation
Silicon sealant (neutral cure, clear or white)
P-trap waste fitting (standard 32mm or 40mm)
Flexible water supply hoses (hot and cold, 30-50 cm)
Adjustable spanner / wrench
Spirit level
Teflon tape (plumber’s tape)
Faucet / tap (sold separately — standard single-hole or deck-mounted)
Step-by-Step Installation Process
Step 1: Unpack carefully. Remove all packaging material. Inspect for any transit damage (report within 48 hours to oceaniawashbasin@gmail.com if any).
Step 2: Position the pedestal base in the desired location. Mark the floor position with chalk.
Step 3: Install the faucet/tap into the pre-drilled faucet hole before mounting. Use plumber’s tape on threads.
Step 4: Install the waste fitting (P-trap / bottle trap) into the pre-drilled drain hole.
Step 5: Position the pedestal column, feed the drain pipe and water supply hoses through the pedestal centre.
Step 6: Place the washbasin on the pedestal. Use spirit level to ensure it is level. Apply silicon sealant to the joint between basin and pedestal.
Step 7: Connect water supply hoses to hot and cold water valves. Connect waste pipe to floor drain.
Step 8: Turn on water supply, test for leaks. Allow silicon to cure 24 hours before use.
Plumber Cost Guide — Major Indian Cities
Mumbai: ₹1,500 – ₹4,000 per visit | Delhi: ₹1,000 – ₹3,000 | Bangalore: ₹1,500 – ₹3,500
Hyderabad: ₹1,200 – ₹3,000 | Chennai: ₳1,000 – ₹2,500 | Pune: ₹1,000 – ₹2,500
👉 Buy Marble Pedestal Washbasin at ₹47,250 — Free Delivery
https://www.oceaniawashbasin.shop/product-page/marble-pedestal-washbasin-2 | www.oceaniawashbasin.shop | WhatsApp/Call: +91 9770300444 | Installation support provided